Overview
| MLIT filing number | 2103120 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | February 9, 2006 |
| Manufacturer(s) | Nissan |
| Component | Fuel Tank |
| Production period | August 2004 — November 25, 2005 |
| Vehicles affected | 20,379 units |
Issue
The fuel tank mounting position is incorrect, allowing road debris to strike the front face of the fuel tank during high-speed driving. If the debris has a sharp protrusion, it may puncture the tank and, in the worst case, damage the fuel tank and cause a fuel leak. Note: the affected tank meets applicable fuel tank technical standards.
Corrective action
On all vehicles, install an additional protective cover on the front face of the fuel tank.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| CBA-PNZ50 | MURANO | PNZ50-000001 — PNZ50-006690 |
| CBA-PZ50 | MURANO | PZ50-000001 — PZ50-004522 |
| CBA-TZ50 | MURANO | TZ50-000001 — TZ50-009409 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
燃料タンクの取付位置が不適切なため、高速走行中に、路上の落下物が燃料タンク前面に衝突することがある。そのため、落下物に突起があった場合、タンクに刺さり、最悪の場合、燃料タンクが損傷し、燃料が漏れるおそれがある。なお、当該タンクは、燃料タンクの技術基準に適合している。
改善措置
全車両、燃料タンク前面にプロテクタを追加して取り付ける。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008688