Overview
| MLIT filing number | 1125980 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | August 27, 2010 |
| Manufacturer(s) | Daihatsu |
| Component | Electric Motor |
| Production period | October 13, 2005 — May 14, 2010 |
| Vehicles affected | 402 units |
Defect
Due to dimensional variation during manufacturing caused by inadequate machine control, the bearing section of the hybrid motor may be subjected to excessive load. This causes the bearing to generate heat, which degrades the grease in the bearing. Continued use in this condition may cause the engine to stall.
Corrective action
On all vehicles, replace the motor with a corrected part and add shims to achieve proper clearance.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| HAD-S320V | Hijet | S320V-0042956 — S320V-0107098 |
| LE-S320V | Hijet | S320V-0027816 — S320V-0042800 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
ハイブリッドモータの軸受け部において、加工機の管理不良による製造時の寸法ばらつきにより軸受けに過大な荷重がかかったものがあり、軸受けの発熱で当該軸受けのグリスが劣化するものがある。そのため、そのままの状態で使用を続けると、エンジンが停止するおそれがある。
改善措置
全車両、モータを対策品と交換するとともに、隙間調整のためシムを追加する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3002413
Related
All Daihatsu recalls · All 2010 recalls · Recall Archive home