Overview
| MLIT filing number | 2104740 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | May 21, 2015 |
| Manufacturer(s) | Mazda |
| Component | Body |
| Production period | July 2014 — March 19, 2015 |
| Vehicles affected | 44,654 units |
Issue
The rain rail located on the inner surface of the front fender panel inside the engine compartment was finished improperly at its ends during the manufacturing process, leaving burrs and sharp edges on the panel edge. Contact with the panel edge during cleaning or similar activity may cause lacerations.
Corrective action
On all affected vehicles, install a protective cover over the rain rail panel edge.
Affected models & chassis ranges
This filing lists 4 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| DBA-DJ3AS | 「デミオ」 | DJ3AS-100008 — DJ3AS-101178 |
| DBA-DJ3FS | 「デミオ」 | DJ3FS-100048 — DJ3FS-119167 |
| LDA-DJ5AS | 「デミオ」 | DJ5AS-100009 — DJ5AS-102757 |
| LDA-DJ5FS | 「デミオ」 | DJ5FS-100032 — DJ5FS-125223 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
エンジンルーム内のフロントフェンダー裏側にあるレインレールの端部処理が不適切なため、パネルエッジ部に製造工程で発生したバリ等がある。そのため、清掃時等に当該パネルエッジ部に手が触れると、切創するおそれがある。
改善措置
全車両、レインレールのパネルエッジ部にプロテクタを装着する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008811