Overview
| MLIT filing number | 2104050 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | May 26, 2011 |
| Manufacturer(s) | Nissan |
| Component | Body |
| Production period | April 14, 2005 — May 26, 2006 |
| Vehicles affected | 93,908 units |
Issue
On the sliding door step, the panel surrounding the lower roller access opening beneath the step is improperly shaped, leaving sharp burrs on the panel edge. If a hand is inserted into the opening during cleaning or similar activity, the burrs may cause a laceration.
Corrective action
On all vehicles, remove the burrs from the affected panel edge.
Affected models & chassis ranges
This filing lists 6 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| CBA-C25 | SERENA | C25-000001 — C25-127660 |
| CBA-NC25 | SERENA | NC25-000001 — NC25-056365 |
| DBA-C25 | SERENA | C25-000001 — C25-127660 |
| DBA-CC25 | SERENA | CC25-000001 — CC25-000365 |
| DBA-CNC25 | SERENA | CNC25-000001 — CNC25-000049 |
| DBA-NC25 | SERENA | NC25-000001 — NC25-056365 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
スライドドアのステップにおいて、ステップ下のスライドドアロアローラ用開口部のパネル形状が不適切なため、清掃時等に当該開口部に手を入れるなどすると、パネル端部のバリにより切創するおそれがある。
改善措置
全車両、当該パネル端部のバリを修正する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008764