Overview
| MLIT filing number | 1157450 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | January 13, 2026 |
| Manufacturer(s) | Isuzu |
| Production period | January 2016 — February 11, 2025 |
| Vehicles affected | 30 units |
Defect
The check valve selection for the hydraulic circuit of the work equipment on street sweeper vehicles was insufficient, allowing heat from the work engine and related components to raise pressure inside the hydraulic lines. The elevated pressure prevents the work equipment check valve from opening, which means the cleaning equipment (left and right brushes) cannot be retracted after the work equipment is stopped, creating a hazard to other traffic. Additionally, repeated exposure to high hydraulic pressure may damage the hydraulic hose.
Corrective action
On all vehicles, replace the work equipment check valve with a corrected part. Also replace the hydraulic hose with a new unit and install a hydraulic hose heat shield.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 2PG-FTR90U4 | FORWARD | FTR90-7005065 — FTR90-7019883 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
清掃車の作業装置の油圧回路において、チェックバルブの選定が不十分なため、作業用エンジン等からの熱により、配管内の圧力が上昇することがある。そのため、圧力により作業装置のチェックバルブが開かず、作業装置停止後、清掃装置（左右ブラシ）が格納できないことから、他の交通を妨げるおそれがある。また、繰り返し高い圧力を油圧ホースが受けると、破損するおそれがある。
改善措置
全車両、作業装置のチェックバルブを対策品に交換する。また、油圧ホースを新品に交換し、油圧ホース遮熱板を取り付ける。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3010351