MLIT Statutory Recall · Japan

Hino Ranger Recall 1149850 — Other (Body/Frame)

Filed June 28, 2021 · Hino

In June 2021, Hino filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Other (Body/Frame), covering the Ranger. The filing affects 50 vehicles manufactured between May 31, 2017 and February 24, 2020.

Overview

MLIT filing number1149850
TypeStatutory Recall (government-mandated recall)
Date filedJune 28, 2021
Manufacturer(s)Hino
ComponentOther (Body/Frame)
Production periodMay 31, 2017 — February 24, 2020
Vehicles affected50 units

Filing in context

The Other (Body/Frame) is the most frequently cited component category in this archive, appearing in 28 of its 4,890 filings. This filing is one of 40 Hino notifications from 2021 in this archive. For scale, 4,147 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 2 years and 8 months.

Defect

On refrigerated/freezer trucks, the mounting bracket for the air suspension remote control BOX was not welded in the position specified on the engineering drawings. This may cause a crack to develop in the bracket. Continued operation allows the crack to propagate. In the worst case, the air suspension remote control BOX may detach from the vehicle and become a hazard to other traffic.

Corrective action

On all vehicles, replace the air suspension remote control BOX mounting bracket with a corrected part. (Due to the urgency of this remedy, verification of its effectiveness is not yet complete. Once verification is finished, a further notification will be filed if necessary and the bracket will be replaced with a permanent corrected part.)

Affected models & chassis ranges

This filing lists 5 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
2KG-FC2ABG Ranger FC2AB-100021 — FC2AB-118577
2KG-FD2ABG Ranger FD2AB-100126 — FD2AB-109011
2PG-FC2ABG Ranger FC2AB-101758 — FC2AB-102718
2PG-FD2ABG Ranger FD2AB-101938 — FD2AB-102358
2PG-FE2ABG Ranger FE2AB-100119 — FE2AB-100957

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

冷蔵冷凍車のエアサスペンションリモコンBOX固定ブラケットにおいて、図面指示通りの位置に部材の溶接が実施されていないため、当該ブラケットに亀裂が入ることがある。そのため、そのまま使用を続けると亀裂が進行し、最悪の場合エアサスペンションリモコンBOXが脱落し、他の交通の妨げになるおそれがある。

改善措置

全車両、エアサスペンションリモコンBOX固定ブラケットを対策品に交換する。 (今回の対策については緊急性を要した為、有効性の検証が不足しているが、検証が終了次第、必要な場合は再度届出を実施の上、恒久対策品と交換する)

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3005001

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Hino filings involving the Other (Body/Frame), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Hino recalls · All 2021 recalls · Recall Archive home