Overview
| MLIT filing number | 1145430 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | July 25, 2019 |
| Manufacturer(s) | Mazda |
| Component | Rearview Mirror |
| Production period | May 24, 2019 — June 2019 |
| Vehicles affected | 115 units |
Defect
The adhesive method used to bond the mirror glass to the holder in the manual anti-glare rearview mirror is improper, resulting in insufficient bond strength. The adhesive may fail, causing the mirror glass to lift away from the holder. In the worst case, the mirror glass can detach completely, preventing the driver from monitoring rearward traffic conditions.
Corrective action
On all vehicles, replace the manual anti-glare rearview mirror with a corrected part.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 6BA-BP5P | ＭＡＺＤＡ３ | BP5P-100006 — BP5P-100120 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
手動防眩ルームミラーにおいて、ホルダと鏡面の接着方法が不適切なため、接着強度が不足しているものがある。そのため、接着が剥がれてホルダから鏡面が浮き上がり、最悪の場合、鏡面が脱落して、後方の交通状況等が確認できなくなるおそれがある。
改善措置
全車両、手動防眩ルームミラーを対策品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3004565