MLIT Statutory Recall · Japan

Daihatsu Hijet Recall 1128430 — Other (Electrical Equipment)

Filed October 26, 2011 · Daihatsu

In October 2011, Daihatsu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Other (Electrical Equipment), covering the Hijet. The filing affects 14,327 vehicles manufactured between January 13, 2005 and August 10, 2011.

Overview

MLIT filing number1128430
TypeStatutory Recall (government-mandated recall)
Date filedOctober 26, 2011
Manufacturer(s)Daihatsu
ComponentOther (Electrical Equipment)
Production periodJanuary 13, 2005 — August 10, 2011
Vehicles affected14,327 units

Filing in context

The Other (Electrical Equipment) is the most frequently cited component category in this archive, appearing in 46 of its 4,890 filings. This filing is one of 2 Daihatsu notifications from 2011 in this archive. For scale, 1,415 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 6 years and 6 months.

Defect

On dump-specification vehicles, the dump switch is improperly designed, allowing beverages spilled from a cup holder mounted above the switch to enter the switch contact area. In the worst case, the power circuit may short circuit, causing the dump body to operate unintentionally.

Corrective action

On all vehicles, replace the dump switch with a corrected part and install a water-blocking sponge at the cup holder mounting area.

Affected models & chassis ranges

This filing lists 5 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
EBD-S201P(改) Hijet S201P-0001951 — S201P-0068535
EBD-S211P(改) Hijet S211P-0000056 — S211P-0154607
LE-S210P(改) Hijet S210P-2002882 — S210P-2131121
TE-S200P(改) Hijet S200P-2001677 — S200P-2067494
TE-S210P(改) Hijet S210P-2000311 — S210P-2131323

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

ダンプ仕様車において、ダンプスイッチの構造が不適切なため、上部に設置したカップホルダーからこぼれた飲料水等が、スイッチの接点部に浸入することがある。そのため、最悪の場合、電源回路が短絡しダンプが誤作動するおそれがある。

改善措置

全車両、ダンプスイッチを対策品に交換するとともに、カップホルダー取付部に止水スポンジを設定する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3002685

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, close in filing date

Other Daihatsu filings closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Daihatsu recalls · All 2011 recalls · Recall Archive home