Overview
| MLIT filing number | 1117020 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | July 20, 2006 |
| Manufacturer(s) | Mitsubishi |
| Component | Fuel Tank |
| Production period | December 16, 1999 — June 2001 |
| Vehicles affected | 1,263 units |
Defect
Fuel tanks manufactured beyond the specified design dimensions were installed, resulting in the clearance between the top of the fuel tank and the body being larger than the specified value. This excessive clearance allows pressure changes inside the tank to cause abnormal deformation. Continued operation can produce cracks in the upper portion of the fuel tank. In the worst case, filling the tank to capacity causes fuel to leak.
Corrective action
On all vehicles, replace the fuel tank with a corrected part and adjust the clearance between the tank and the body floor to within the specified value.
Affected models & chassis ranges
This filing lists 6 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| GH-S32A | PROUDIA | S32A-0000101 — S32A-0000726 |
| GH-S33A | PROUDIA | S33A-0000102 — S33A-0000393 |
| GH-S43A | DIGNITY | S43A-0000101 — S43A-0000148 |
| TA-S32A | PROUDIA | S32A-0100102 — S32A-5100223 |
| TA-S33A | PROUDIA | S33A-0100101 — S33A-5100157 |
| TA-S43A | DIGNITY | S43A-0100101 — S43A-5100106 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
設計指示値を超えて製造された燃料タンクを組み付けたため、燃料タンク上面と車体との隙間が規定値より大きくなるものがあり、燃料タンク内の圧力の変化により異常に変形するものがある。そのため、そのままの状態で使用を続けると、燃料タンク上部に亀裂が発生し、最悪の場合、燃料を満タンにすると燃料が漏れるおそれがある。
改善措置
全車両、燃料タンクを対策品と交換の上、車体フロアとの隙間を規定値以内に調整する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001415
Related
All Mitsubishi recalls · All 2006 recalls · Recall Archive home