Overview
| MLIT filing number | 1116700 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | May 30, 2006 |
| Manufacturer(s) | Hino |
| Component | Steering Linkage |
| Production period | November 24, 2005 — February 13, 2006 |
| Vehicles affected | 73 units |
Defect
In the steering system, one of the two bolts securing the knuckle arm to the steering knuckle was improperly heat-treated, leaving it with insufficient strength. This may cause that bolt to fracture prematurely. In the worst case, both bolts may fracture, causing the knuckle arm to detach and resulting in loss of steering control.
Corrective action
On all vehicles, replace the affected bolt with a conforming part. If that bolt is found to be damaged, replace the remaining bolt with a new part as well.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| PJ-KV234L1 | 日野ブルーリボンⅡ | KV234L1-7000276 — KV234L1-7000299 |
| PJ-KV234N1 | 日野ブルーリボンⅡ | KV234N1-7000053 — KV234N1-7000096 |
| PJ-KV234Q1 | 日野ブルーリボンⅡ | KV234Q1-7000021 — KV234Q1-7000043 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
かじ取り装置において、ナックルアームをナックルに固定するボルト２本のうち１本について、熱処理が不適切なため、強度が不足しているものがある。そのため、早期に当該ボルトが破損し、最悪の場合、２本とも折損し、ナックルアームが外れて操舵不能となるおそれがある。
改善措置
全車両、当該ボルトを良品と交換する。なお、当該ボルトが損傷している場合には、他のボルトも新品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001379