Overview
| MLIT filing number | 2102840 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | June 16, 2005 |
| Manufacturer(s) | Isuzu |
| Component | Power Steering |
| Production period | February 2002 — February 23, 2004 |
| Vehicles affected | 466 units |
Issue
The support position of the hydraulic power steering feed hose is incorrectly located, causing the hose to bend excessively and sustain excessive stress at that point. This stress may cause the hose to crack, allowing power steering fluid to leak and increasing steering effort.
Corrective action
On all vehicles, the feed hose support position is relocated and the hose is replaced with a new part.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KK-LR233F1 | ERGA | LR233F1-3000125 — LR233F1-3000181 |
| KK-LR233J1 | ERGA | LR233J1-3000783 — LR233J1-3001417 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
油圧式パワーステアリングの配管（フィードホース）の支持位置が不適切なため、ホースが過度に曲げられて当該部分に過大な力がかかり亀裂が生じるものがある。そのため、パワーステアリングオイルが漏れて、かじ取ハンドルの操作力が増大するおそれがある。
改善措置
全車両、フィードホース支持位置を変更すると共に当該ホースを新品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008664