MLIT Statutory Recall · Japan

Isuzu Gala Recall 1142501 — Parking Lever/Pedal

Filed April 19, 2018 · Isuzu

In April 2018, Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Parking Lever/Pedal, covering the Gala. The filing affects 3,214 vehicles manufactured between March 2014 and February 27, 2018.

Overview

MLIT filing number1142501
TypeStatutory Recall (government-mandated recall)
Date filedApril 19, 2018
Manufacturer(s)Isuzu
ComponentParking Lever/Pedal
Production periodMarch 2014 — February 27, 2018
Vehicles affected3,214 units

Filing in context

The Parking Lever/Pedal is the most frequently cited component category in this archive, appearing in 3 of its 4,890 filings. This filing is one of 34 Isuzu notifications from 2018 in this archive. For scale, 2,170 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 3 years and 11 months.

Defect

On large buses, the parking brake lever console is improperly secured. If an object becomes lodged between the console and the driver's compartment partition, the console can shift and interfere with the parking brake lever. When the lever is pulled up, it may be held short of the locked position. In the worst case, engine vibration or similar forces can release the lever, allowing the vehicle to roll away.

Corrective action

On all vehicles, the parking brake lever console and parking brake lever retaining bracket will be replaced with corrected parts. Because parts procurement requires additional time (mid- to late May), owners will be notified in the interim not to place any objects between the parking brake lever console and the driver's compartment partition.

Affected models & chassis ranges

This filing lists 10 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
2DG-RU2AHDJ GALA RU2AHD-60011 — RU2AHD-60046
2KG-RU2AHDJ GALA RU2AHD-60011 — RU2AHD-60046
2RG-RU1ESDJ GALA RU1ESD-60011 — RU1ESD-60126
2TG-RU1ASDJ GALA RU1ASD-60011 — RU1ASD-60208
LDG-RU8JHBJ GALA RU8JHB-60163 — RU8JHB-60548
QPG-RU1ESBJ GALA RU1ESB-60769 — RU1ESB-61507
QRG-RU1ASCJ GALA RU1ASC-60368 — RU1ASC-62222
QRG-RU1ESBJ GALA RU1ESB-60769 — RU1ESB-61507
QTG-RU1ASCJ GALA RU1ASC-60368 — RU1ASC-62222
SDG-RU8JHBJ GALA RU8JHB-60163 — RU8JHB-60548

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

大型バスにおいて、駐車ブレーキレバー用コンソールの固定方法が不適切なため、当該コンソールと運転席仕切りの間に物をはさむと当該コンソールがずれて、駐車ブレーキレバーと干渉することがある。そのため、駐車ブレーキレバーを引き上げるとロック位置の手前で保持され、最悪の場合、エンジンの振動等によりレバーが解除され車両が動き出すおそれがある。

改善措置

全車両、駐車ブレーキレバー用コンソールと駐車ブレーキレバー固定金具を対策品に交換する。なお、部品の準備に時間を要するため(5月中旬から下旬)、交換するまでの間、駐車ブレーキレバー用コンソールと運転席仕切りの間に物をはさまない旨をお客様に注意喚起する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3004248

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, close in filing date

Other Isuzu filings closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Isuzu recalls · All 2018 recalls · Recall Archive home