Overview
| MLIT filing number | 1156782 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | June 26, 2025 |
| Manufacturer(s) | Hino |
| Component | Rearview Mirror |
| Production period | July 11, 2012 — December 13, 2024 |
| Vehicles affected | 951 units |
Defect
The rearview mirrors were designed to incorrect specifications. As a result, (1) some left-side exterior rearview mirrors have an insufficient mirror surface radius of curvature, and (2) some interior rearview mirrors (convex type) have an insufficient mirror surface width. These conditions may cause the vehicle to fail to meet the structural requirements for single-operator bus service.
Corrective action
Replace the rearview mirrors on all affected vehicles with corrected parts.
Affected models & chassis ranges
This filing lists 18 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 2DG-HX9JHCE | PONCHO | HX9JHC-40011 — HX9JHC-40252 |
| 2DG-HX9JLCE | PONCHO | HX9JLC-40015 — HX9JLC-41068 |
| 2DG-RU2AHDA | SELEGA | RU2AHD-40038 — RU2AHD-40528 |
| 2KG-RU1ESDA | SELEGA | RU1ESD-40028 — RU1ESD-40881 |
| 2KG-RU2AHDA | SELEGA | RU2AHD-40038 — RU2AHD-40528 |
| 2PG-RU1ASDA | SELEGA | RU1ASD-40018 — RU1ASD-41883 |
| 2PG-RU1ESDA | SELEGA | RU1ESD-40028 — RU1ESD-40881 |
| LDG-RU8JHBA | SELEGA | RU8JHB-40127 — RU8JHB-40675 |
| QPG-RU1ESBA | SELEGA | RU1ESB-40797 — RU1ESB-42398 |
| QQG-RU1ASBR | SELEGA | RU1ASB-40033 — RU1ASB-40075 |
| QRG-RU1ASCA | SELEGA | RU1ASC-40024 — RU1ASC-42668 |
| QRG-RU1ESBA | SELEGA | RU1ESB-40797 — RU1ESB-42398 |
| QTG-RU1ASCA | SELEGA | RU1ASC-40024 — RU1ASC-42668 |
| SDG-HX9JHBE | PONCHO | HX9JHB-40047 — HX9JHB-40140 |
| SDG-HX9JLBE | PONCHO | HX9JLB-40235 — HX9JLB-41203 |
| SDG-RU8JHBA | SELEGA | RU8JHB-40127 — RU8JHB-40675 |
| SKG-HX9JHBE | PONCHO | HX9JHB-40047 — HX9JHB-40140 |
| SKG-HX9JLBE | PONCHO | HX9JLB-40235 — HX9JLB-41203 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
後写鏡において、設計寸法が不適切なため、１．左側後写鏡の鏡面曲率半径が小さいものがある。２．室内後写鏡（凸面鏡）の鏡面幅が小さいものがある。そのため、ワンマンバスの構造要件に適合しないおそれがある。
改善措置
全車両、当該後写鏡を対策品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3010144