MLIT Statutory Recall · Japan

Isuzu Erga Recall 1140842 — Wiring

Filed July 31, 2017 · Isuzu

In July 2017, Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Wiring, covering the Erga. The filing affects 568 vehicles manufactured between October 15, 2015 and April 10, 2017.

Overview

MLIT filing number1140842
TypeStatutory Recall (government-mandated recall)
Date filedJuly 31, 2017
Manufacturer(s)Isuzu
ComponentWiring
Production periodOctober 15, 2015 — April 10, 2017
Vehicles affected568 units

Filing in context

The Wiring is the most frequently cited component category in this archive, appearing in 236 of its 4,890 filings. This filing is one of 37 Isuzu notifications from 2017 in this archive. For scale, 3,095 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 year and 5 months.

Defect

On large fixed-route buses, improperly routed wiring inside the driver's-side wall panel allows the wiring to contact the edge of the wall panel bracket. Continued operation can damage the wiring insulation, causing a short circuit. In the worst case, the doors may become unable to open or close.

Corrective action

On all vehicles, add protective material to the driver's-side wall panel bracket. Inspect the wiring in the affected area and repair any damaged wiring.

Affected models & chassis ranges

This filing lists 6 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
QDG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000848
QKG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000848
QKG-LV290Q1 ERGA LV290Q1-7000003 — LV290Q1-7000244
QPG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000848
QPG-LV290Q1 ERGA LV290Q1-7000003 — LV290Q1-7000244
QRG-LV290Q1 ERGA LV290Q1-7000003 — LV290Q1-7000244

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

②大型路線バスにおいて、運転者席側壁パネル内部の配線の配策が不適切なため、配線が側壁パネルブラケットの端部と干渉するものがある。そのため、そのまま使用を続けると、配線の被覆が損傷して短絡し、最悪の場合、扉が開閉できなくなるおそれがある。

改善措置

②全車両、運転者席側壁パネルブラケットに保護材を追加するとともに、当該部の配線を点検し、損傷している場合は配線を補修する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3004070

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Isuzu filings involving the Wiring, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Isuzu recalls · All 2017 recalls · Recall Archive home