MLIT Statutory Recall · Japan

Isuzu Erga Recall 1140404 — Wiring

Filed April 20, 2017 · Isuzu

In April 2017, Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Wiring, covering the Erga. The filing affects 465 vehicles manufactured between October 15, 2015 and November 2016.

Overview

MLIT filing number1140404
TypeStatutory Recall (government-mandated recall)
Date filedApril 20, 2017
Manufacturer(s)Isuzu
ComponentWiring
Production periodOctober 15, 2015 — November 2016
Vehicles affected465 units

Filing in context

The Wiring is the most frequently cited component category in this archive, appearing in 236 of its 4,890 filings. This filing is one of 37 Isuzu notifications from 2017 in this archive. For scale, 3,188 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 year and 1 month.

Defect

On large and medium route buses, the wiring routed to the instrument panel below the driver's seat is improperly routed, causing the wiring to contact the edge of the instrument panel. Continued use can damage the wire insulation, resulting in a short circuit. In the worst case, the engine may stall while driving and fail to restart.

Corrective action

On all vehicles, a protective material is added to the driver's seat instrument panel. The wiring in that area is then inspected, and any damaged wiring is repaired.

Affected models & chassis ranges

This filing lists 6 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
QDG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000573
QKG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000573
QPG-LV290N1 ERGA LV290N1-7000007 — LV290N1-7000573
QPG-LV290Q1 ERGA LV290Q1-7000003 — LV290Q1-7000155
QRG-LV290Q1 ERGA LV290Q1-7000003 — LV290Q1-7000155
SKG-LR290J2 ERGA LR290J2-7000007 — LR290J2-7000096

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

大型・中型路線バスにおいて、 ④運転者席計器盤配線の配索が不適切なため、配線が計器盤パネルの端部と干渉するものがある。そのため、そのまま使用を続けると、配線の被覆が損傷して短絡し、最悪の場合、走行中にエンジンが停止し、再始動できなくなるおそれがある。

改善措置

④全車両、運転者席計器盤パネルに保護材を追加するとともに、当該部の配線を点検し、損傷している場合は補修する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3009199

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Isuzu filings involving the Wiring, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Isuzu recalls · All 2017 recalls · Recall Archive home