Overview
| MLIT filing number | 1133850 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | July 9, 2014 |
| Manufacturer(s) | Hino, Toyota |
| Component | Body |
| Production period | May 12, 2014 — May 30, 2014 |
| Vehicles affected | 6 units |
Defect
During the body welding process for light truck cabs, the automated underbody welding machine program is incorrect, resulting in an insufficient number of weld spots near the seat belt anchor points on some units. In a collision, the seat belt anchor area may deform, causing the seat belt to fail to restrain the occupant.
Corrective action
On all vehicles, inspect the affected welds. On any vehicle found to have insufficient weld spots, replace the cab with a known-good unit.
Affected models & chassis ranges
This filing lists 4 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| TKG-XZC605V | トヨタ ダイナ２００ | XZC605-0007861 — XZC605-0007868 |
| TKG-XZU605 | トヨタ ダイナ２００ | XZU605-0007404 — XZU605-0007412 |
| TKG-XZU685M | DUTRO | XZU685-0003518 |
| TKG-XZU695 | トヨタ ダイナ２００ | XZU695-0002006 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
小型トラックの車体（キャブ）の溶接工程において、アンダーボデー用自動溶接機のプログラムが不適切なため、シートベルト取付部付近の溶接打点が不足しているものがある。そのため、衝突時にシートベルト取付部が変形し、乗員を拘束できなくなるおそれがある。
改善措置
全車両、当該溶接部を点検し、溶接打点が不足しているものは、キャブを良品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3003304
Related
All Hino recalls · All Toyota recalls · All 2014 recalls · Recall Archive home