MLIT Statutory Recall · Japan

Honda / Isuzu Bighorn, Horizon Recall 1105620 — Service brake — general

Filed April 16, 1999 · Honda, Isuzu

In April 1999, Honda & Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Service brake — general, covering the Bighorn, Horizon. The filing affects 4,232 vehicles manufactured between February 12, 1998 and September 14, 1998.

Overview

MLIT filing number1105620
TypeStatutory Recall (government-mandated recall)
Date filedApril 16, 1999
Manufacturer(s)Honda, Isuzu
ComponentService brake — general
Production periodFebruary 12, 1998 — September 14, 1998
Vehicles affected4,232 units

Filing in context

This notification is a joint filing by 2 manufacturers: Honda & Isuzu.

The Service brake — general is the most frequently cited component category in this archive, appearing in 16 of its 4,890 filings. This filing is one of 5 Honda notifications from 1999 in this archive. For scale, 2,031 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 7 months.

Defect

The valve spring seat in the brake booster vacuum pump is improperly assembled on some units. When the engine is stopped, reverse airflow may displace the valve spring seat. In the worst case, this prevents the valve from functioning, causing brake pedal effort to increase above normal.

Corrective action

On all vehicles, replace the affected vacuum pump with the corrected part.

Affected models & chassis ranges

This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
KH-UBS73DW Bighorn UBS73DW-7200006 — UBS73DW-7200161
KH-UBS73GW Bighorn UBS73GW-7200038 — UBS73GW-7210728
KH-UBS73GWH HORIZON UBS73GW-7200041 — UBS73GW-7203562

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

ブレーキ倍力装置のバキュームポンプにおいて、バルブスプリングシートの組付けに不適 切なものがあり、そのままの状態で使用を続けると、原動機停止時の空気の逆流により、 当該バルブスプリングシートがずれて、最悪の場合、バルブが作動しなくなり、ブレーキ ペダルの踏力が通常より重くなる。

改善措置

全車両、当該バキュームポンプを対策品交換する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000171

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Honda filings involving the Service brake — general, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Honda recalls · All Isuzu recalls · All 1999 recalls · Recall Archive home