MLIT Improvement Campaign · Japan

Nissan Fairlady Z Improvement Campaign 2107020 — Wiring

Filed October 24, 2024 · Nissan

In October 2024, Nissan filed an improvement campaign with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Wiring, covering the Fairlady Z. The filing affects 1,845 vehicles manufactured between June 30, 2022 and January 26, 2024.

Overview

MLIT filing number2107020
TypeImprovement Campaign (manufacturer improvement measure / 改善対策)
Date filedOctober 24, 2024
Manufacturer(s)Nissan
ComponentWiring
Production periodJune 30, 2022 — January 26, 2024
Vehicles affected1,845 units

Filing in context

The Wiring is the most frequently cited component category in this archive, appearing in 236 of its 4,890 filings. This filing is one of 22 Nissan notifications from 2024 in this archive. For scale, 2,461 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 year and 6 months.

Issue

In the electrical wiring of the pop-up hood system, an incorrect connector terminal arrangement in the bumper harness causes the input values from the pedestrian collision detection sensor to be computed incorrectly. Although operation of the pop-up hood has been confirmed to satisfy the Safety Standards under these conditions, the system may not operate correctly under the company's internal test conditions.

Corrective action

Replace the bumper harness with one having the correct terminal arrangement.

Affected models & chassis ranges

This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
3BA-RZ34 フェアレディZ RZ34-100063 — RZ34-120945
5BA-RZ34 フェアレディZ RZ34-100063 — RZ34-120945

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

ポップアップフードの電気配線において、バンパーハーネスのコネクタ端子配列が不適切なため、歩行者衝突検知センサの入力値が正しく演算されない。この場合においても、ポップアップフードの作動は保安基準を満足することを確認しているものの、社内基準の試験条件下において、正しく作動しないおそれがある。

改善措置

正しい端子配列のバンパーハーネスに交換する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3009858

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Nissan filings involving the Wiring, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Nissan recalls · All 2024 recalls · Recall Archive home