Overview
| MLIT filing number | 2103620 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | November 20, 2007 |
| Manufacturer(s) | Hino |
| Component | Other (frame/body) |
| Production period | February 15, 2005 — November 29, 2006 |
| Vehicles affected | 36 units |
Issue
Certain single-operator buses with a passenger entrance located between the front and rear axles have a body height at the rear of the entrance exceeding 250 mm above ground when unladen, yet are not equipped with a rear-wheel underrun guard.
Corrective action
On all vehicles, install a rear-wheel underrun guard.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| ACG-HU8JLFP | Blue Ribbon City | HU8JLF-40012 — HU8JLF-40060 |
| ACG-HU8JMFP | Blue Ribbon City | HU8JMF-40011 — HU8JMF-40036 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
前軸と後軸の間に乗車口のあるワンマンバスにおいて、空車時の乗車口後方の車体高さが地上高２５０ｍｍを超えているにもかかわらず、後輪巻込防止装置を装着していないものがある。
改善措置
全車両、後輪巻込防止装置を取付ける。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008727