MLIT Statutory Recall · Japan

Hino / Isuzu / Toyota Elf, Dutro and 1 more model Recall 1155080 — Other (frame/body)

Filed July 22, 2024 · Hino, Isuzu, Toyota

In July 2024, Hino, Isuzu & Toyota filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Other (frame/body), covering the Elf, Dutro and 1 more model. The filing affects 77 vehicles manufactured between January 13, 2022 and December 15, 2023.

Overview

MLIT filing number1155080
TypeStatutory Recall (government-mandated recall)
Date filedJuly 22, 2024
Manufacturer(s)Hino, Isuzu, Toyota
ComponentOther (frame/body)
Production periodJanuary 13, 2022 — December 15, 2023
Vehicles affected77 units

Filing in context

This notification is a joint filing by 3 manufacturers: Hino, Isuzu & Toyota.

The Other (frame/body) is the most frequently cited component category in this archive, appearing in 42 of its 4,890 filings. This filing is one of 19 Hino notifications from 2024 in this archive. For scale, 3,983 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 year and 11 months.

Defect

The three-piece rear underrun protection device was not sufficiently verified during design. When installed on vehicles with an overall width of 2,000 mm or greater, the effective surface area on each outer rear face of the device is less than 420 cm². As a result, the device does not conform to Safety Standards Article 18-2.

Corrective action

On all vehicles, replace both outer sections of the rear underrun protection device with the corrected part.

Affected models & chassis ranges

This filing lists 11 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
2KG-XZU710M DUTRO XZU710-0037616 — XZU710-0037640
2KG-XZU775M DUTRO XZU775-0003956 — XZU775-0004162
2RG-NMR88AN エルフ NMR88-7009634 — NMR88-7012833
2RG-NPR88AM エルフ NPR88-7029063 — NPR88-7030946
2RG-NPR88AN エルフ NPR88-7013950 — NPR88-7026789
2RG-XZC710 トヨタダイナ XZC710-0005613 — XZC710-0005824
2RG-XZU710 トヨタダイナ XZU710-0033724
2RG-XZU710M DUTRO XZU710-0032473 — XZU710-0035991
2RG-XZU720M DUTRO XZU720-0019472 — XZU720-0019994
2TG-NMR88M エルフ NMR88-7017282
2TG-NPR88AM エルフ NPR88-7029492 — NPR88-7032240

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

3分割式の突入防止装置において、設計時の確認が不十分なため、全幅2,000mm以上の自動車に装着した場合、当該装置の両側後面の有効表面積が420cm2に満たない。 そのため、保安基準第18条の2に適合していない。

改善措置

全車両、突入防止装置の両側を対策品に交換する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3009778

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Hino filings involving the Other (frame/body), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Hino recalls · All Isuzu recalls · All Toyota recalls · All 2024 recalls · Recall Archive home