Overview
| MLIT filing number | 1137560 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | February 9, 2016 |
| Manufacturer(s) | Hino |
| Component | Door |
| Production period | September 21, 2007 — April 26, 2010 |
| Vehicles affected | 765 units |
Defect
The weld securing the interior operating handle of the emergency exit door is improperly made, resulting in insufficient strength. When the handle is operated, the weld may separate, preventing the emergency exit door from being opened.
Corrective action
On all vehicles, inspect the interior operating handle of the emergency exit door. On any vehicle where the weld is improperly made, replace the door with a conforming unit.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| BDG-RR7JJBA | MELPHA | RR7JJB-40040 — RR7JJB-40716 |
| BDG-RX6JFBA | RIESSE | RX6JFB-40049 — RX6JFB-40608 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
非常口扉の室内操作ハンドルの溶接が不適切なため、強度が不足しているものがある。そのため、ハンドルを操作した場合、溶接が外れ、非常口扉を開けることができなくなるおそれがある。
改善措置
全車両、非常口扉の室内操作ハンドルを点検し、溶接が不適切なものは、扉を良品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3003722