Overview
| MLIT filing number | 1136550 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | October 28, 2015 |
| Manufacturer(s) | Mitsubishi |
| Component | Pressure control/transmission component |
| Production period | February 15, 2013 — March 12, 2013 |
| Vehicles affected | 1,682 units |
Defect
The lip seal assembly process for the brake booster is performed incorrectly, resulting in some units assembled without grease applied. This increases the sliding resistance of the lip seal, causing it to roll back and allow air to leak. In the worst case, brake pedal effort increases and stopping distance is extended.
Corrective action
On all vehicles, the brake booster is inspected and, where applicable, replaced with a conforming unit.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| DLA-GG2W | アウトランダー ＰＨＥＶ | GG2W-0002133 — GG2W-0003842 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
ブレーキブースターのリップシールの組付け作業が不適切なため、グリースが塗布されずに組付けられたものがある。そのため、リップシールの摺動抵抗が増大して捲れるとエアーが漏れ、最悪の場合、ブレーキペダルの操作力が増大し、制動距離が長くなるおそれがある。
改善措置
全車両、ブレーキブースターを確認し、該当するものはブレーキブースターを良品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3003620
Related
All Mitsubishi recalls · All 2015 recalls · Recall Archive home