Overview
| MLIT filing number | 2106092 |
|---|---|
| Type | Improvement Campaign (manufacturer improvement measure / 改善対策) |
| Date filed | March 4, 2021 |
| Manufacturer(s) | Suzuki |
| Component | Engine control computer |
| Production period | September 2017 — December 2020 |
| Vehicles affected | 62,888 units |
Issue
The engine control computer contains an incorrect control program. As a result, when the engine is started with the throttle open, ignition timing is not properly controlled. This may cause engine stall when pulling away from a stop or during re-acceleration after deceleration.
Corrective action
On all vehicles, the engine control computer is replaced with a corrected/revised part.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 2BH-CA4AA | Let's | CA4AA-165865 — CA4AA-215006 |
| 2BH-CA4BA | アドレスＶ５０ | CA4BA-116721 — CA4BA-131330 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
エンジン制御コンピュータにおいて、制御プログラムが不適切なため、 ２．スロットルを開けて始動した場合、エンジンの点火制御が適切に行われず、発進時または減速後の再加速時にエンストを起こすおそれがある。
改善措置
全車両、エンジン制御コンピュータを対策品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008911