Improvement Campaign 2102600 — Body

Overview

Issue

In the tail-gate lifter, the arm connecting the hydraulic lift cylinder to the gate lift linkage has insufficient strength, and the pressure relief valve on the cylinder may be set incorrectly. Repeated gate raising and lowering operations may cause a crack to develop in the arm. If use continues, the arm may fracture. In the worst case, the gate may drop and injure an operator or bystander.

Corrective action

① On all vehicles equipped with Type A tail-gate lifters, inspect the unit and adjust the cylinder pressure relief valve to reduce pressure. Where cracks are present in the arm, replace it with a corrected part. Where no cracks are present, add reinforcement material. ② On all vehicles equipped with Type B tail-gate lifters, inspect the unit and adjust the cylinder pressure relief valve to reduce pressure. Where cracks are present in the arm, replace it with a corrected part.

Affected models & chassis ranges

This filing lists 754 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Original Japanese (MLIT source text)

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008644

Related

All Hino recalls · All Isuzu recalls · All Mazda recalls · All Mitsubishi recalls · All Nissan recalls · All Nissan Diesel recalls · All Toyota recalls · All 2004 recalls · Recall Archive home