In December 2015, Honda filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Starting System, covering the Forza Si, CBR250R. The filing affects 757 vehicles manufactured between April 18, 2014 and May 2014.
Overview
| MLIT filing number | 1222830 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | December 17, 2015 |
| Manufacturer(s) | Honda |
| Component | Starting System |
| Production period | April 18, 2014 — May 2014 |
| Vehicles affected | 757 units |
Filing in context
The Starting System is the most frequently cited component category in this archive, appearing in 35 of its 4,890 filings. This filing is one of 41 Honda notifications from 2015 in this archive. For scale, 2,947 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 month.
Defect
In the engine starting system, the waterproof sealant applied to the starter magnetic switch was improperly filled, allowing sealant to penetrate into the terminal where the fuse is assembled. During service, the sealant softens, reducing contact pressure at the fuse terminal, which increases contact resistance and causes heat buildup. Continued use can melt the fuse assembly, resulting in a conduction failure that causes the engine to stall and prevents restart. Alternatively, the starter magnetic switch circuit may short circuit, in the worst case leading to a vehicle fire.
Corrective action
On all vehicles, inspect the starter magnetic switch and replace it with a known-good unit. Also inspect the fuse coupler; if melting is found, replace the wire harness with a new unit.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| JBK-MC41 | ＣＢＲ２５０Ｒ | MC41-1401613 — MC41-1402313 |
| JBK-MF12 | フォルツァ Ｓｉ | MF12-1003378 — MF12-1003433 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
エンジンの始動装置において、スタータマグネチックスイッチの防水用シール剤の充填が不適切なため、シール剤がスタータマグネチックスイッチのヒューズを組付ける端子内部に浸入するものがある。そのため、使用過程で端子内部に浸入したシール剤が軟化してヒューズ端子の接圧が低下し、接触抵抗が増加して発熱し、そのままの状態で使用を続けると、ヒューズ組付部が溶損して導通不良となり、エンストして再始動できない、または、スタータマグネチックスイッチの回路が短絡して火災に至るおそれがある。
改善措置
全車両、スタータマグネチックスイッチを点検し、良品に交換する。また、ヒューズカプラを点検し、溶損している場合は、ワイヤハーネスを新品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3007271
Related recalls
Same manufacturer, same component
Other Honda filings involving the Starting System, closest to this one by filing date.
Starting System — affects 14 vehicles.
Open recall detail →Starting System — affects 153,575 vehicles.
Open recall detail →Starting System — affects 1,043 vehicles.
Open recall detail →Starting System — affects 720,418 vehicles.
Open recall detail →Starting System — affects 20,887 vehicles.
Open recall detail →Other recalls affecting the same models
Filings whose affected type codes overlap with this one, newest first.
Other (Emissions/Noise) — affects 5,901 vehicles.
Open recall detail →Fuel pump — affects 5,176 vehicles.
Open recall detail →Service brake (general) — affects 2,568 vehicles.
Open recall detail →Starting system — affects 7,400 vehicles.
Open recall detail →Fuel pump — affects 4,328 vehicles.
Open recall detail →