MLIT Statutory Recall · Japan

Honda Forza Si Recall 1223120 — Service brake (general)

Filed February 18, 2016 · Honda

In February 2016, Honda filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Service brake (general), covering the Forza Si. The filing affects 2,568 vehicles manufactured between April 20, 2013 and September 2013.

Overview

MLIT filing number1223120
TypeStatutory Recall (government-mandated recall)
Date filedFebruary 18, 2016
Manufacturer(s)Honda
ComponentService brake (general)
Production periodApril 20, 2013 — September 2013
Vehicles affected2,568 units

Filing in context

The Service brake (general) is the most frequently cited component category in this archive, appearing in 11 of its 4,890 filings. This filing is one of 18 Honda notifications from 2016 in this archive. For scale, 2,281 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 5 months.

Defect

In the rear wheel brake line, the bolts fastening the rear brake hose to the rear brake pipes were improperly torqued during assembly, leaving them insufficiently tightened on some vehicles. Continued use may allow the connection to loosen and brake fluid to leak. In the worst case, the rear brakes may become ineffective.

Corrective action

On all vehicles, retighten the affected bolts to the specified torque. If brake fluid is already leaking, inspect the fluid level and replenish to the specified level if insufficient.

Affected models & chassis ranges

This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
JBK-MF12 フォルツァ Si MF12-1000001 — MF12-1002569

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

後輪ブレーキ配管において、リヤブレーキホースとリヤブレーキパイプを締結するボルトの締付け作業が不適切なため、当該ボルトの締付けが不足しているものがある。そのため、そのままの状態で使用を続けると、締付け部が緩んでブレーキ液が漏れ、最悪の場合、リヤブレーキが効かなくなるおそれがある。

改善措置

全車両、当該ボルトを正規のトルクで締付ける。なお、ブレーキ液が漏れている場合は、ブレーキ液量を点検し、不足していればブレーキ液を規定量まで補充する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3007301

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Honda filings involving the Service brake (general), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Honda recalls · All 2016 recalls · Recall Archive home