Overview
| MLIT filing number | 1157080 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | August 28, 2025 |
| Manufacturer(s) | Honda |
| Component | Speedometer |
| Production period | November 21, 2024 — January 13, 2025 |
| Vehicles affected | 2 units |
Defect
During production of the speedometer, improper jig management during painting of the front brake panel — which houses the speed-transmission cable insertion hole — allows paint to enter the hole, reducing its diameter on some units. When the cable is forcefully inserted during assembly, the cable tip may bend. In the worst case, tire rotation is not transmitted through the cable and the speedometer fails to operate.
Corrective action
All vehicles: replace the front brake panel with a conforming unit, and replace the speed-transmission cable and speedometer with new parts.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 2BH-AA09 | スーパーカブ５０ | 2BH-AA09 — スーパーカブ５０ |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
速度計において、速度伝達用ケーブルを組付ける前側ブレーキパネルを塗装する治具管理が不適切なため、当該ケーブルの挿入穴に塗装が付着し、径が小さいものがある。そのため、ケーブル組付け時に強く押し込むと、最悪の場合、ケーブル先端が曲がりタイヤの回転が伝わらず、速度計が作動しない。
改善措置
全車両、前側ブレーキパネルを良品と、速度伝達用ケーブル及び速度計を新品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3010217