MLIT Statutory Recall · Japan

Mitsubishi XN18, XS18 and 3 more models Recall 1156820 — Cooling System

Filed July 3, 2025 · Mitsubishi

In July 2025, Mitsubishi filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Cooling System, covering the XN18, XS18 and 3 more models. The filing affects 360 vehicles manufactured between August 20, 2024 and April 30, 2025.

Overview

MLIT filing number1156820
TypeStatutory Recall (government-mandated recall)
Date filedJuly 3, 2025
Manufacturer(s)Mitsubishi
ComponentCooling System
Production periodAugust 20, 2024 — April 30, 2025
Vehicles affected360 units

Filing in context

The Cooling System is the most frequently cited component category in this archive, appearing in 34 of its 4,890 filings. This filing is one of 27 Mitsubishi notifications from 2025 in this archive. For scale, 3,305 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 8 months.

Defect

On agricultural tractors, the coolant drain hose on the cooling system is improperly assembled, resulting in insufficient clamping force. Continued use in this condition may cause the coolant drain hose to pull free from the pin, allowing coolant to leak. In the worst case, the engine may stall.

Corrective action

On all vehicles, remove the joint, hose, and drain cap attached to the engine cylinder block and replace them with a plug. Update the coolant replacement instructions in the owner's manual accordingly.

Affected models & chassis ranges

This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
GT25J XN18 T25J-15011 — T25J-15051; T25J-10011 — T25J-10038; T25J-30011 — T25J-30099; T25J-50011 — T25J-50114; T25J-70011 — T25J-70137

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

農耕トラクタの冷却装置において、冷却水ドレンホースの組付けが不適切なため、締結力が不足しているものがある。そのため、その状態で使用を続けると、冷却水ドレンホースがピンから抜け出し、冷却水が漏れて、最悪の場合、エンジンが停止するおそれがある。

改善措置

全車両、エンジンのシリンダブロックに取り付けられているジョイントとホース及びドレンキャップを外し、プラグに交換する。取扱説明書に記載している、冷却水の交換についての内容を変更する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3010177

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Mitsubishi filings involving the Cooling System, closest to this one by filing date.

All Mitsubishi recalls · All 2025 recalls · Recall Archive home