Overview
| MLIT filing number | 1154600 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | March 19, 2024 |
| Manufacturer(s) | Hino, Isuzu |
| Component | Other (Safety Lighting) |
| Production period | December 2018 — January 10, 2024 |
| Vehicles affected | 188 units |
Defect
On swap body container carrier vehicles, the rear combination lamp mounting bracket was designed with insufficient consideration of vibration loads, leaving the bracket with insufficient strength. Vibration during driving causes cracks to develop in the bracket. In the worst case, the bracket fractures and separates from the vehicle together with the rear combination lamp, creating a hazard to other traffic.
Corrective action
On all vehicles, replace the rear combination lamp mounting bracket with the corrected part. Also inspect the rear combination lamp and, if damage is found, replace it with a new unit.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 2PG-CYJ77CA | ギガ | CYJ77C-7004659 — CYJ77C-7026631 |
| 2PG-CYJ77DA | ギガ | CYJ77D-7000107 — CYJ77D-7003894 |
| 2RG-FW1AHJ | PROFIA | FW1AH-109025 — FW1AH-120643 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
スワップボディコンテナキャリアのリヤコンビランプ取付ブラケットにおいて、振動における検討が不十分なため、当該取付ブラケットの強度が不足している。そのため、走行振動などにより当該取付ブラケットに亀裂が生じ、最悪の場合、当該取付ブラケットが破断し、リヤコンビランプと共に脱落することで、他の交通の妨げとなるおそれがある。
改善措置
全車両、リヤコンビランプ取付ブラケットを対策品に交換する。また、リヤコンビランプを点検し、破損がある場合は新品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3009660
Related
All Hino recalls · All Isuzu recalls · All 2024 recalls · Recall Archive home