Overview
| MLIT filing number | 1131610 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | June 4, 2013 |
| Manufacturer(s) | Isuzu |
| Component | Turn signal |
| Production period | January 16, 2006 — March 27, 2013 |
| Vehicles affected | 337 units |
Defect
On aerial work platform vehicles, the rear lighting assembly was repositioned during body installation at an incorrect location. As a result, the rear turn signal mounting position may not conform to the Safety Standards requirement that the outermost edge of the turn signal lens be within 400 mm of the outermost edge of the vehicle.
Corrective action
Replace the rear lighting mounting bracket with the corrected part and reposition the rear lighting assembly to the compliant location.
Affected models & chassis ranges
This filing lists 4 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| PB-NKR81N | Elf | NKR81-7034735 — NKR81-7072902 |
| PDG-NKR85YN | Elf | NKR85Y-7000114 — NKR85Y-7002848 |
| SKG-NKR85YN | Elf | NKR85Y-7002664 — NKR85Y-7003635 |
| TKG-NKR85N | Elf | NKR85-7025305 — NKR85-7029312 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
高所作業車において、架装時に移設した後面灯火器の取付位置が不適切なため、後面方向指示器の取付位置が道路運送車両の保安基準（方向指示器の照明部の最外縁が自動車の最外側から４００ｍｍ以内となるように取り付け）に適合しないおそれがある。
改善措置
後面灯火器取付金具を対策品に変更し、後面灯火器の取付位置を変更する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3003043