Overview
| MLIT filing number | 1130940 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | February 15, 2013 |
| Manufacturer(s) | Mazda |
| Component | Other equipment |
| Production period | May 31, 2011 — May 31, 2011 |
| Vehicles affected | 3 units |
Defect
On the aftermarket beacon light installed on the vehicle, stress concentrates at the insert nut sections of the lower cover among the 16 peripheral fastening points connecting the upper and lower covers. When driving vibration, solar heat, and other external factors act on these stress-concentrated areas, cracks may develop. Continued use in this condition can damage the fastening points and, in the worst case, cause the upper cover to detach from the vehicle.
Corrective action
On all vehicles, replace the beacon light with a corrected part.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| CBF-BVJY12 | FAMILIA VAN | VJY12-510018 — VJY12-510021 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
車両に架装した警光灯（社外品）の上下カバーの外周締結部（計１６ヶ所）において、下側カバーの埋込ナット部に応力集中が発生しており、そこに走行振動や日射熱等の外的要因が加わることで亀裂が発生することがある。そのため、そのままの状態で使用を続けると、締結部が損傷し、最悪の場合、上側カバーが脱落するおそれがある。
改善措置
全車両、警光灯を対策品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3002960