MLIT Statutory Recall · Japan

Isuzu Giga Recall 1118020 — Other (Engine)

Filed January 18, 2007 · Isuzu

In January 2007, Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Other (Engine), covering the Giga. The filing affects 44 vehicles manufactured between August 25, 2005 and October 17, 2006.

Overview

MLIT filing number1118020
TypeStatutory Recall (government-mandated recall)
Date filedJanuary 18, 2007
Manufacturer(s)Isuzu
ComponentOther (Engine)
Production periodAugust 25, 2005 — October 17, 2006
Vehicles affected44 units

Filing in context

The Other (Engine) is the most frequently cited component category in this archive, appearing in 46 of its 4,890 filings. This filing is one of 59 Isuzu notifications from 2007 in this archive. For scale, 4,189 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 year and 1 month.

Defect

On vehicles equipped with two refrigeration unit compressors, the mounting bracket for the refrigeration compressor idle pulley has insufficient strength. Continued use allows belt reaction forces to damage the bracket. In the worst case, the pulley and mounting bracket may detach from the vehicle and become a road hazard to other traffic.

Corrective action

On all vehicles, replace the idle pulley mounting bracket with the corrected part.

Affected models & chassis ranges

This filing lists 7 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
PJ-CVR77P6 GIGA CVR77P6-7000003 — CVR77P6-7000008
PJ-CXY77V6J GIGA CXY77V6J-7000058 — CXY77V6J-7000063
PJ-CYJ77W6 GIGA CYJ77W6-7000186 — CYJ77W6-7000510
PJ-CYJ77W6A GIGA CYJ77W6-7000186 — CYJ77W6-7000510
PJ-CYL77V6 GIGA CYL77V6-7000040 — CYL77V6-7000516
PJ-CYL77V6Z GIGA CYL77V6Z-7000027
PJ-CYY77V6 GIGA CYY77V6-7000009

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

冷凍機用コンプレッサを2個装着した車両において、冷凍機コンプレッサ用アイドルプーリ取付金具の強度が不足しているものがある。そのため、そのまま使用を続けると、ベルトからの反力により当該金具が破損し、最悪の場合、プーリ及び取付金具が脱落し、他の交通を妨げるおそれがある。

改善措置

全車両、アイドルプーリ取付金具を対策品と交換する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001531

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Isuzu filings involving the Other (Engine), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Isuzu recalls · All 2007 recalls · Recall Archive home