Overview
| MLIT filing number | 1115902 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | December 21, 2005 |
| Manufacturer(s) | Isuzu |
| Component | Clutch |
| Production period | August 2005 — September 26, 2005 |
| Vehicles affected | 6 units |
Defect
On vehicles equipped with a mechanical automatic transmission, the bracket securing the ice-prevention cover over the clutch stroke sensor was manufactured with insufficient strength and improperly assembled. Vehicle vibration during operation may cause the bracket to fracture, allowing ice to form on the sensor. Continued use can damage the stroke sensor, preventing clutch engagement and rendering the vehicle inoperable.
Corrective action
On all vehicles, replace the bracket with the corrected part.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| PJ-EXD51D6 | GIGA | EXD51D6-7000004 — EXD51D6-7000014 |
| PJ-EXD51G6 | GIGA | EXD51G6-7000001 — EXD51G6-7000015 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
②機械式自動変速装置付き車両において、クラッチストロークセンサ部への着氷を防止するカバーの取り付け金具の強度が不足しているものが組み付けられたため、走行中の車両振動等により、当該金具が破損することがある。そのため、当該センサ部に着氷して、そのまま使用を続けると、最悪の場合、ストロークセンサが損傷し、クラッチの接続ができず、走行不能となるおそれがある。
改善措置
②全車両、当該金具を正規品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001296