MLIT Statutory Recall · Japan

Mitsubishi Aero Star Recall 1109020 — Muffler

Filed December 17, 2002 · Mitsubishi

In December 2002, Mitsubishi filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Muffler, covering the Aero Star. The filing affects 60 vehicles manufactured between November 29, 2001 and July 2002.

Overview

MLIT filing number1109020
TypeStatutory Recall (government-mandated recall)
Date filedDecember 17, 2002
Manufacturer(s)Mitsubishi
ComponentMuffler
Production periodNovember 29, 2001 — July 2002
Vehicles affected60 units

Filing in context

The Muffler is the most frequently cited component category in this archive, appearing in 8 of its 4,890 filings. This filing is one of 34 Mitsubishi notifications from 2002 in this archive. For scale, 4,083 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 8 months.

Defect

In the optional catalytic converter-integrated muffler, the structure of the exhaust gas inlet is improper, and the bracket supporting the exhaust pipe between the engine and the muffler has insufficient rigidity and inadequate vibration-damping rubber capacity. These conditions cause cracks to develop at the weld of the muffler's exhaust gas inlet. Continued use may result in exterior noise levels exceeding the specified limit.

Corrective action

On all vehicles, replace the affected muffler with a corrected part and replace the bracket with vibration-damping rubber with a corrected part.

Affected models & chassis ranges

This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
KL-MP37JK Aero Star MP37JK-20042 — MP37JK-20116
KL-MP37JM Aero Star MP37JM-20125 — MP37JM-20126

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

消音装置にオプション設定されている触媒内蔵消音器(マフラ)において、当該マフラの 排出ガス入口の構造が不適切かつ、原動機とマフラ間の排気管を支持している金具の剛性 と当該金具の防振ゴムの容量が不足しているため、当該マフラの排出ガス入口の溶接部に 亀裂が発生し、そのままの状態で使用を続けると、車外騒音が基準値を超えるおそれがあ る。

改善措置

全車両、当該マフラを対策品と交換するとともに、防振ゴム付き金具を対策品と交換する 。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000536

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Mitsubishi filings involving the Muffler, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Mitsubishi recalls · All 2002 recalls · Recall Archive home