MLIT Statutory Recall · Japan

Hino / Isuzu Ranger, Forward Recall 1151150 — Other (safety lighting)

Filed March 31, 2022 · Hino, Isuzu

In March 2022, Hino & Isuzu filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Other (safety lighting), covering the Ranger, Forward. The filing affects 80 vehicles manufactured between April 12, 2012 and November 30, 2016.

Overview

MLIT filing number1151150
TypeStatutory Recall (government-mandated recall)
Date filedMarch 31, 2022
Manufacturer(s)Hino, Isuzu
ComponentOther (safety lighting)
Production periodApril 12, 2012 — November 30, 2016
Vehicles affected80 units

Filing in context

This notification is a joint filing by 2 manufacturers: Hino & Isuzu.

The Other (safety lighting) is the most frequently cited component category in this archive, appearing in 20 of its 4,890 filings. This filing is one of 28 Hino notifications from 2022 in this archive. For scale, 3,972 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 4 years and 7 months.

Defect

On auger-type utility trucks (hole-digging and pole-setting vehicles), the large rear reflector is mounted in an incorrect position, placing the winch hook within the geometric visibility zone of the reflector. As a result, the vehicle may not conform to Safety Standards Article 38-2 (large rear reflectors).

Corrective action

On all vehicles, add a mounting base to relocate the large rear reflector to a conforming position.

Affected models & chassis ranges

This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
QKG-FE7JGAA Ranger FE7JGA-10228 — FE7JGA-10305
SKG-FSR90S2 フォワード FSR90-7001766 — FSR90-7006548
TKG-GD7JGAA Ranger GD7JGA-10138 — GD7JGA-10773

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

穴掘建柱車において、大型後部反射器の取付位置が不適切なため、幾何学的視認性の領域にウインチフックが配置されているものがある。そのため、保安基準第38条の2(大型後部反射器)に適合しないおそれがある。

改善措置

全車両、取付台座を追加して、大型後部反射器の取付位置を変更する。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3005148

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Hino filings involving the Other (safety lighting), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Hino recalls · All Isuzu recalls · All 2022 recalls · Recall Archive home