MLIT Statutory Recall · Japan

Hino Ranger Recall 1142030 — Pressure control and transmission components

Filed February 15, 2018 · Hino

In February 2018, Hino filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Pressure control and transmission components, covering the Ranger. The filing affects 6 vehicles manufactured between September 30, 2017 and October 31, 2017.

Overview

MLIT filing number1142030
TypeStatutory Recall (government-mandated recall)
Date filedFebruary 15, 2018
Manufacturer(s)Hino
ComponentPressure control and transmission components
Production periodSeptember 30, 2017 — October 31, 2017
Vehicles affected6 units

Filing in context

The Pressure control and transmission components is the most frequently cited component category in this archive, appearing in 2 of its 4,890 filings. This filing is one of 43 Hino notifications from 2018 in this archive. For scale, 4,662 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 1 month.

Defect

On medium-duty trucks equipped with air brakes, improper tightening of the relay valve mounting bracket during assembly has left some vehicles missing one or more of the bracket's clamping bolts. Continued use in this condition allows driving vibration to dislodge the bracket, damaging the air lines and causing an air leak.

Corrective action

On all vehicles, inspect the mounting bracket clamping bolts. If any bolts are missing, install and torque them to the specified value.

Affected models & chassis ranges

This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
2PG-FG2ABA Ranger FG2AB-100016 — FG2AB-100021

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

中型トラックの空気式ブレーキにおいて、リレーバルブの固定金具の締付け作業が不適切なため、締付けボルトの一部が欠品しているものがある。そのため、そのままの状態で使用を続けると、走行振動等により当該固定金具が外れ、エア配管が損傷し、エアが漏れるおそれがある。

改善措置

全車両、当該固定金具の締付けボルトを点検し、欠品している場合は、適正に締め付ける。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3004197

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Hino filings involving the Pressure control and transmission components, closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Hino recalls · All 2018 recalls · Recall Archive home