Overview
| MLIT filing number | 1111930 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | August 19, 2004 |
| Manufacturer(s) | Hino |
| Component | Vehicle Frame |
| Production period | September 1998 — November 17, 1999 |
| Vehicles affected | 3 units |
Defect
On vehicles converted to X-ray units, the vehicle frame has insufficient strength, causing cracks to develop at the lateral rod bracket mounting surface on the right-side frame. Continued use allows the crack to propagate and, in the worst case, the lateral rod may detach, compromising driving stability.
Corrective action
Add a reinforcement plate to the lateral rod mounting area on the right-side frame of all vehicles.
Affected models & chassis ranges
This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KC-FH2KNEA(改） | FH2KNE-10019 — FH2KNE-10031 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
レントゲン車に改造した車両において、車枠の強度が不足しているため、右側車枠のラ テラルロッド用ブラケットの取り付け面に亀裂が生じるものがある。そのため、そのまま の状態で使用を続けると亀裂が進行し、最悪の場合、ラテラルロッドが脱落し、走行安定 性が損なわれるおそれがある。
改善措置
全車両、右側車枠のラテラルロッド取り付け部に補強板を追加する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000853