Overview
| MLIT filing number | 1106740 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | September 28, 2000 |
| Manufacturer(s) | Hino |
| Component | Main Brake (General) |
| Production period | June 20, 2000 — September 2000 |
| Vehicles affected | 72 units |
Defect
The arm bracket of the automatic brake clearance adjuster in the braking system is missing on some vehicles. Without the bracket, automatic adjustment of the gap between the brake drum and lining cannot occur. Continued operation without the bracket may, in the worst case, reduce braking force.
Corrective action
Inspect all vehicles. On any vehicle found to be missing the arm bracket, install the bracket.
Affected models & chassis ranges
This filing lists 4 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KL-RU1FSEA | 日野セレガＲ | RU1FSE-40013 — RU1FSE-40040 |
| KL-RU1JHEA | 日野セレガＲ | RU1JHE-40011 — RU1JHE-40032 |
| KL-RU4FPEA | 日野セレガＲ | RU4FPE-40011 — RU4FPE-40016 |
| KL-RU4FSEA | 日野セレガＲ | RU4FSE-40013 — RU4FSE-40035 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
制動装置の隙間自動調整装置において、アームブラケットが取り付けられていないものが あるため、ブレーキドラムとライニング隙間の自動調整ができなくなり、そのままの状態 で使用を続けると、最悪の場合、制動力が低下するおそれがある。
改善措置
全車両点検し、当該アームブラケットが取り付けられていないものは取り付ける。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000291