Overview
| MLIT filing number | 1106940 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | December 6, 2000 |
| Manufacturer(s) | Hino |
| Component | Pressure Control/Transmission |
| Production period | August 2000 — September 26, 2000 |
| Vehicles affected | 7 units |
Defect
The wiring routing for the front-wheel brake control system (anti-lock brake system) and the brake wear warning circuit is improper, causing the wiring to contact and abrade the brake hose. Continued use may, in the worst case, perforate the hose and cause fluid to leak.
Corrective action
On all vehicles, reroute the harness and replace the brake hose with a new part.
Affected models & chassis ranges
This filing lists 6 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KL-HU2PLEA | Blue Ribbon City | HU2PLE-40011 |
| KL-HU2PLEL | Blue Ribbon City | HU2PLE-40019 |
| KL-HU2PMEA | Blue Ribbon City | HU2PME-40020 |
| KL-HU2PMEL | Blue Ribbon City | HU2PME-40017 |
| KL-HU2PREA | Blue Ribbon City | HU2PRE-40013 |
| KL-HU2PREL | Blue Ribbon City | HU2PRE-40014 — HU2PRE-40015 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
制動装置の前輪用制動力制御装置（アンチロックブレーキシステム）の電気配線と摩耗警 報の電気配線の取り回しが不適切なため、当該電気配線がブレーキホースに干渉して摩耗 することがあり、そのままの状態で使用を続けると、最悪の場合、ブレーキホースに穴が あき、液漏れするおそれがある。
改善措置
全車両、当該ハーネスの取り回しを変更するとともに、ブレーキホースを新品と交換する 。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000315