Overview
| MLIT filing number | 1231970 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | March 25, 2021 |
| Manufacturer(s) | Honda |
| Component | Fuel pump |
| Production period | February 27, 2019 — September 2020 |
| Vehicles affected | 6,925 units |
Defect
The low-pressure fuel pump impeller is molded under improper manufacturing conditions, resulting in insufficient resin density. This causes the impeller to swell and deform when exposed to fuel. The deformed impeller contacts the pump cover, causing the fuel pump to malfunction. In the worst case, the engine may stall while the vehicle is in motion.
Corrective action
Replace the low-pressure fuel pump on all vehicles with a corrected part.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| 6BA-FK7 | CIVIC | FK7-1200010 — FK7-1202170 |
| DBA-FK7 | CIVIC | FK7-1102011 — FK7-1106390 |
| DBA-FK8 | CIVIC | FK8-1202277 — FK8-1202666 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
低圧燃料ポンプのインペラ（樹脂製羽根車）において、成形条件が不適切なため、樹脂密度が低くなって、燃料により膨潤して変形することがある。そのため、インペラがポンプカバーと接触して燃料ポンプが作動不良となり、最悪の場合、走行中エンストに至るおそれがある。
改善措置
全車両、低圧燃料ポンプを対策品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3008204