Overview
| MLIT filing number | 1143800 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | November 27, 2018 |
| Manufacturer(s) | Hino, Isuzu |
| Component | Reverse Lamp |
| Production period | August 2016 — January 10, 2018 |
| Vehicles affected | 3 units |
Defect
On large trucks, incorrect installation instructions for the combination lamp have resulted in some vehicles having the upper edge of the reverse lamp illumination area mounted at or above 1,200 mm from the ground, which does not meet the reverse lamp installation standard.
Corrective action
On all vehicles, replace the tail lamp stay with the corrected part and adjust the mounting height so that the upper edge of the reverse lamp illumination area is no higher than 1,200 mm from the ground.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| QDG-CYZ52BMQ | ギガ | CYZ52BMQ-7000074 |
| QDG-FS1EREA | PROFIA | FS1ERE-10382 — FS1ERE-10543 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
大型トラックにおいて、コンビネーションランプの取付指示が不適切なため、後退灯の照明部の上縁の高さが地上１２００ｍｍ以上に取付されたものがあり、後退灯の取付基準に満足しない。
改善措置
全車両、テールランプステーを対策品に交換し、後退灯の照明部の上縁の高さが地上１２００ｍｍ以下となるよう、取付高さを変更する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3004398
Related
All Hino recalls · All Isuzu recalls · All 2018 recalls · Recall Archive home