Overview
| MLIT filing number | 1114600 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | June 23, 2005 |
| Manufacturer(s) | Isuzu |
| Component | Pressure Control and Transmission Component |
| Production period | May 31, 2004 — November 22, 2004 |
| Vehicles affected | 21 units |
Defect
On vehicles fitted with a rear body, the clamp for the rear brake pipe was omitted during assembly. When the brake pipe vibrates, it may contact the rear body stopper mounting bolt. Continued operation may cause the brake pipe to be perforated, allowing brake fluid to leak and reducing braking effectiveness.
Corrective action
Relocate the rear body stopper rearward and install a clamp on the brake pipe. Any brake pipe found to be damaged must be replaced with a new part.
Affected models & chassis ranges
This filing lists 4 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KK-FRR35G4S | FORWARD | FSR35G4S-7000941 |
| PB-FRD35G3S | FORWARD | FRD35G3S-7000007 |
| PB-FRR35G3S | FORWARD | FRR35G3S-7000179 — FRR35G3S-7000330 |
| PB-FSR35G3 | FORWARD | FSR35G3-7000085 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
リヤボデーを架装した車両において、リヤブレーキパイプのクランプを取付忘れたため、ブレーキパイプが振動した際、ストッパーリヤボデーの取付ボルトとブレーキパイプが干渉する車両がある。そのため、このまま使用を続けると、ブレーキパイプに穴が明き、ブレーキ液が漏れ、ブレーキの効きが悪くなるおそれがある。
改善措置
ストッパーリヤボデーの取付位置を後方に移設し、ブレーキパイプにクランプを取付ける。 尚、ブレーキパイプが損傷しているものは、新品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001147