Overview
| MLIT filing number | 1113030 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | November 11, 2004 |
| Manufacturer(s) | Isuzu |
| Component | Other (Drivetrain) |
| Production period | December 2003 — March 30, 2004 |
| Vehicles affected | 14 units |
Defect
A non-genuine mounting bracket was installed on the propeller shaft center bearing during assembly. The incorrect bracket causes premature deterioration of the rubber component in that area. Continued operation under these conditions may result in failure of the mounting bracket in the worst case.
Corrective action
On all vehicles, replace the affected mounting bracket with a genuine part.
Affected models & chassis ranges
This filing lists 2 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KL-FVZ34S4 | FORWARD | FVZ34S4-3000091 — FVZ34S4-3000094 |
| KL-FVZ34V4 | FORWARD | FVZ34V4-3000129 — FVZ34V4-3000138 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
プロペラシャフトのセンタベアリングにおいて、当該ベアリングの取付金具に正規部品 でないものを組み付けているため、当該部のラバーが早期に損傷するものがある。そのた め、そのままの状態で使用を続けると、最悪の場合、当該取付金具が破損するおそれがあ る。
改善措置
全車両、当該取付金具を正規品と交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000971