MLIT Statutory Recall · Japan

Honda Super Cub 110 Pro Recall 1153490 — Service Brake (General)

Filed July 6, 2023 · Honda

In July 2023, Honda filed a statutory recall with Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) concerning the Service Brake (General), covering the Super Cub 110 Pro. The filing affects 897 vehicles manufactured between March 25, 2022 and September 30, 2022.

Overview

MLIT filing number1153490
TypeStatutory Recall (government-mandated recall)
Date filedJuly 6, 2023
Manufacturer(s)Honda
ComponentService Brake (General)
Production periodMarch 25, 2022 — September 30, 2022
Vehicles affected897 units

Filing in context

The Service Brake (General) is the most frequently cited component category in this archive, appearing in 16 of its 4,890 filings. This filing is one of 18 Honda notifications from 2023 in this archive. For scale, 2,855 of the 4,890 filings in this archive report a larger number of affected vehicles; the vehicles involved here were manufactured over a span of about 6 months.

Defect

Improper assembly of the front brake hose to the vehicle body results in the hose being routed out of its correct position. The misrouted hose contacts the edge of the hose guide. Continued operation damages the hose and, in the worst case, may cause brake fluid to leak and result in loss of front brake effectiveness.

Corrective action

On all vehicles, inspect the routing position of the front brake hose. If the hose is found incorrectly routed, replace it with a new part and reinstall it in the correct position.

Affected models & chassis ranges

This filing lists 1 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.

Type code (型式)ModelChassis ranges
8BJ-JA61 スーパーカブ110プロ JA61-1000017 — JA61-100916

Original Japanese (MLIT source text)

Show the original Japanese filing text

状況

制動装置において、前輪ブレーキホースの車体への組付け作業が不適切なため、正しい位置に組付けられていないものがある。そのため、当該ホースがホースガイド端部と接触し、そのまま使用を続けると、当該ホースが損傷し、最悪の場合、ブレーキ液が漏れ、前輪ブレーキが効かなくなるおそれがある。

改善措置

全車両、前輪ブレーキホースの組付け位置を点検し、誤った位置へ組付けられている場合は、当該ホースを新品と交換して、正しい位置に組付ける。

Source & verification

This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:

https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3009399

Check your own vehicle: to see whether this filing affects a specific chassis number — and find every other recall for it — use the chassis lookup on the home page.

Related recalls

Same manufacturer, same component

Other Honda filings involving the Service Brake (General), closest to this one by filing date.

Other recalls affecting the same models

Filings whose affected type codes overlap with this one, newest first.

All Honda recalls · All 2023 recalls · Recall Archive home