Overview
| MLIT filing number | 1115120 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | September 14, 2005 |
| Manufacturer(s) | Mitsubishi |
| Component | Pressure control transmission component |
| Production period | September 17, 2004 — June 2005 |
| Vehicles affected | 65 units |
Defect
An incorrect part was assembled into the connector of the electrical wiring connected to the hydraulic unit, allowing water to enter the hydraulic unit through the connector. Continued operation causes internal corrosion within the unit, leading to poor electrical continuity. In the worst case, the unit may malfunction and fail to release braking force after the brake pedal is released.
Corrective action
On all vehicles, the affected electrical wiring is replaced with a corrected part and the hydraulic unit is replaced with a new unit.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| PA-BE63DG | BE63DG-400145 — BE63DG-400225 | |
| PA-BE64DG | BE64DG-400036 — BE64DG-400188 | |
| PA-BE64DJ | BE64DJ-400002 — BE64DJ-400059 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
ハイドロリックユニットに接続する電気配線のコネクタ部に誤品が組付けられたため、当該コネクタ部からハイドロリックユニットに水が浸入するものがある。そのため、そのまま使用を続けると、当該ユニット内部が腐食して導通不良となり、最悪の場合、当該ユニットが誤作動し、ブレーキペダルを戻しても制動力が解除されないおそれがある。
改善措置
全車両、当該電気配線を対策品に交換するとともに、ハイドロリックユニットを新品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3001204
Related
All Mitsubishi recalls · All 2005 recalls · Recall Archive home