Overview
| MLIT filing number | 1113270 |
|---|---|
| Type | Statutory Recall (government-mandated recall) |
| Date filed | December 21, 2004 |
| Manufacturer(s) | Hino |
| Component | Vehicle frame |
| Production period | April 2003 — September 2004 |
| Vehicles affected | 50 units |
Defect
The rear license plate mounting bracket has insufficient strength, which may cause cracks to develop in the bracket. Continued use allows the cracks to progress until, in the worst case, the bracket detaches and creates a road hazard for other traffic.
Corrective action
On all vehicles, replace the license plate mounting bracket with the improved part.
Affected models & chassis ranges
This filing lists 3 type code(s). A vehicle is affected if its chassis number falls within one of the ranges below.
| Type code (型式) | Model | Chassis ranges |
|---|---|---|
| KL-SHD1EAG | XLER4X20004505066 — XLER4X20005101117; YS2R4X20001292908 — YS2R4X20001295150 | |
| KL-SHD1FAG | YS2R4X20001292534 — YS2R4X20001292802 | |
| 不明 | YS2R4X20001282430 — YS2R4X20001289353 |
Original Japanese (MLIT source text)
Show the original Japanese filing text
状況
リヤナンバープレート取り付けブラケットの強度が不足しているため、当該ブラケット に亀裂が生じるものがある。そのため、そのまま使用を続けると、亀裂が進行し、最悪の 場合、当該ブラケットが脱落して他の交通の安全を妨げるおそれがある。
改善措置
全車両、ナンバープレート取り付けブラケットを改善品に交換する。
Source & verification
This entry reproduces public data from Japan's MLIT recall registry. English text is jdmvin.com's own translation; always verify against the official source:
https://renrakuda.mlit.go.jp/renrakuda/ris-detail-car.html?class=recalldatacar&id=3000997